AVAILABLE NOW // QUOTE-SYNCHRONIZED
MATERIALS CATALOG
Colors below come directly from the same catalog used by checkout.
Additions or removals in quoting automatically appear here.
MAT_01 AVAILABLE
PLA
Bambu Lab PLA Basic
A reliable rigid material for fast prototypes, fixtures, form studies, and controlled indoor parts.
BEST FOR Fit checks, rigid brackets, covers, jigs, presentation models, assembly aids, and fast design iterations.
APPLICATION LIMIT Use caution around sustained heat, outdoor exposure, repeated impact, long-term load, or safety-critical service.
DECISION RULE Choose PLA when dimensional clarity, rigidity, surface quality, and fast iteration matter most.
Heat deflection 57 °C HDT at 0.45 MPa
Bending strength 76 MPa XY specimen
Impact strength 26.6 kJ/m² XY specimen
MAT_02 AVAILABLE
Matte PLA
Bambu Lab PLA Matte
An appearance-focused PLA with a subdued surface that reduces glare and makes layer lines less prominent.
BEST FOR Visible housings, demo hardware, architectural models, display pieces, and presentation-ready prototypes.
APPLICATION LIMIT The refined finish does not add heat resistance or certify the part for structural, outdoor, or safety-critical use.
DECISION RULE Choose Matte PLA when presentation quality matters more than maximum mechanical performance.
Heat deflection 58 °C HDT at 0.45 MPa
Bending strength 53 ± 6 MPa XY specimen
Impact strength 19.2 ± 3.7 kJ/m² XY specimen
MAT_03 AVAILABLE
PETG
Bambu Lab PETG
A tougher general-purpose material for functional parts that need more durability, moisture resistance, and heat margin than PLA.
BEST FOR Functional brackets, clips, housings, tools, field-test parts, evaluated outdoor accessories, and durable utility components.
APPLICATION LIMIT PETG is not a high-temperature or safety-rated material. Final suitability still depends on load, geometry, UV duration, chemicals, and consequences of failure.
DECISION RULE Choose PETG for tougher utility parts, repeated handling, moisture exposure, and a higher service-temperature margin.
Heat deflection 69–71 °C Qualified Bambu PETG range
Bending strength 64–75 MPa Qualified Bambu PETG range
Impact strength 31.5–34.2 kJ/m² Qualified Bambu PETG range
!
PART PERFORMANCE // WHAT THE DATA MEANS
MATERIAL DATA IS NOT THE SAME AS PART PERFORMANCE.
Published Bambu Lab values come from standardized test specimens, not
your finished part. Actual strength, heat resistance, and durability
depend on geometry, print orientation, layer adhesion, wall thickness,
infill, assembly loads, and operating conditions. If a part’s failure
could cause injury, equipment damage, or costly downtime, request a
technical review before ordering.
